Enum V3ActRelationshipType

java.lang.Object
java.lang.Enum<V3ActRelationshipType>
org.hl7.fhir.dstu3.model.codesystems.V3ActRelationshipType
All Implemented Interfaces:
Serializable, Comparable<V3ActRelationshipType>

  • Enum Constant Summary

    Enum Constants
    Enum Constant
    Description
    ActClassTemporallyPertains
    Codes that describe the relationship between an Act and a financial instrument such as a financial transaction, account or invoice element.
    Specifies under what circumstances (target Act) the source-Act may, must, must not or has occurred
    Expresses values for describing the relationship relationship between an InvoiceElement or InvoiceElementGroup and a billable act.
    Expresses values for describing the relationship between a FinancialTransaction and an Account.
    Abstract collector for ActRelationhsip types that relate two acts by their timing.
    Abstract collector for ActRelationship types that relate two acts by their approximate timing.
    The target act is a desired outcome of the source act.
    Description: The source act is intended to provide active immunity against the effects of the target act (the target act describes an infectious disease)
    Description: The source act is intended to offer an additional treatment for the management or cure of a pre-existing adverse situation described by the target act.
    An addendum (source) to an existing service object (target), containing supplemental information.
    The relationship that links to a Transportation Act (target) from another Act (source) indicating that the subject of the source Act entered into the source Act by means of the target Transportation act.
    Description: A directed association between a source Act and a target Act.
    A relationship in which the target act authorizes or certifies the source act.
    Definition: The source act is performed to block the effects of the target act.
    Indicates that the target observation(s) provide an initial reference for the source observation or observation group.
    Description: An assertion that an act was the cause of another act.This is stronger and more specific than the support link.
    A relationship that provides an ability to associate a financial transaction (target) as a charge to a clinical act (source).
    A contraindication is just a negation of a reason, i.e.
    The target act is a component of the source act, with no semantics regarding composition or aggregation implied.
    Description:The source act complies with, adheres to, conforms to, or is permissible under (in whole or in part) the policy, contract, agreement, law, conformance criteria, certification guidelines or requirement conveyed by the target act.
    A relationship in which the source act's effective time is the same as the target act's effective time.
    A relationship that provides an ability to associate a financial transaction (target) as a cost to a clinical act (source).
    A relationship in which the source act is covered by or is under the authority of a target act.
    A credit relationship ties a financial transaction (target) to an account (source).
    A relationship from an Act to a Control Variable.
    curative indication
    adjunct curative indication
    A debit relationship ties a financial transaction (target) to an account (source).
    The relationship that links to a Transportation Act (target) from another Act (source) indicating that the subject of the source Act departed from the source Act by means of the target Transportation act.
    Description: The source act is intended to help establish the presence of a (an adverse) situation described by the target act.
    The source act documents the target act.
    Associates a derived Act with its input parameters.
    A relationship in which the source act's effective time is wholly within the target act's effective time (including end points, as defined in the act's effective times) UsageNote: Inverse code is SBSEAE
    A relationship in which the source act ends after the target act ends.
    A relationship in which the source act's effective time ends after or concurrent with the end of the target act's effective time.
    A relationship in which the source act ends after the target act starts.
    A relationship in which the source act's effective time ends after or concurrent with the start of the target act's effective time.
    The source Act ends before the end of the target Act (i.e.
    A relationship in which the source act's effective time ends before or concurrent with the end of the target act's effective time.
    A relationship in which the source act ends before the target act starts.
    A relationship in which the source act's effective time ends before or concurrent with the start of the target act's effective time.
    A relationship in which the source act's effective time ends with the end of the target act's effective time.
    The source Act ends when the target act starts (i.e.
    A relationship in which the source act ends within the target act's effective time (including end points, as defined in the act's effective times) UsageNote: Inverse code is SBEEAE
    Expresses an association that links two instances of the same act over time, indicating that the instance are part of the same episode, e.g.
    A relationship in which the source act's effective time ends near the end of the target act's effective time.
    A relationship in which the source act's effective time ends near the start of the target act's effective time.
    Indicates that the target Act provides evidence in support of the action represented by the source Act.
    Description:The source act is aggravated by the target act.
    This is the inversion of support.
    The source act fulfills (in whole or in part) the target act.
    The generalization relationship can be used to express categorical knowledge about services (e.g., amilorid, triamterene, and spironolactone have the common generalization potassium sparing diuretic).
    A goal-evaluation links an observation (intent or actual) to a goal to indicate that the observation evaluates the goal.
    A goal that one defines given a patient's health condition.
    Description: The source act is intented to provide immunity against the effects of the target act (the target act describes an infectious disease)
    The source Act is independent of the time of the target Act.
    Used to capture the link between a potential service ("master" or plan) and an actual service, where the actual service instantiates the potential service.
    the target act documents a set of circumstances (events, risks) which prevent successful completion, or degradation of quality of, the source Act.
    Items located
    A relationship that limits or restricts the source act by the elements of the target act.
    The target Acts are aggregated by the source Act.
    Definition: Indicates that the attributes and associations of the target act provide metadata (for example, identifiers, authorship, etc.) for the source act.
    An assertion that a new observation may be the manifestation of another existing observation or action.
    The source act removes or lessens the occurrence or effect of the target act.
    Definition: Used to link a newer version or 'snapshot' of a business object (source) to an older version or 'snapshot' of the same business object (target).
    A trigger-match links an actual service (e.g., an observation or procedure that took place) with a service in criterion mood.
    adjunct mitigation
    Description: The source act is intended to provide long term maintenance improvement or management of a pre-existing adverse situation described by the target act.
    Used to assign a "name" to a condition thread.
    added to help the parsers
    A desired state that a service action aims to maintain.
    A desired outcome that a service action aims to meet finally.
    The source act is a single occurrence of a repeatable target act.
    A relationship between a source Act that provides more detailed properties to the target Act.
    Relates either an appointment request or an appointment to the order for the service being scheduled.
    An observation that should follow or does actually follow as a result or consequence of a condition or action (sometimes called "post-conditional".) Target must be an observation as a goal, risk or any criterion.
    A relationship in which the source act's effective time overlaps the target act's effective time in any way.
    Description: The source act is intended to provide palliation for the effects of the target act.
    The source Act is a composite of the target Acts.
    Description: The source act is intended to provide passive immunity against the effects of the target act (the target act describes an infectious disease).
    This is a very unspecific relationship from one item of clinical information to another.
    A requirement to be true before a service is performed.
    A relationship in which the target act is a predecessor instance to the source act.
    Description: The source act is intended to reduce the risk of of an adverse situation to emerge as described by the target act.
    The target observation qualifies (refines) the semantics of the source observation.
    null
    Description:A relationship in which the target act is carried out to determine whether an effect attributed to the source act can be recreated.
    Definition: The source act is performed to recover from the effects of the target act.
    A relationship in which the target act is referred to by the source act.
    Reference ranges are essentially descriptors of a class of result values assumed to be "normal", "abnormal", or "critical." Those can vary by sex, age, or any other criterion.
    Description:The source act is wholly or partially alleviated by the target act.
    A relationship between a source Act that seeks to reverse or undo the action of the prior target Act.
    A noteworthy undesired outcome of a patient's condition that is either likely enough to become an issue or is less likely but dangerous enough to be addressed.
    A replacement source act replaces an existing target act.
    Description: The reason or rationale for a service.
    A relationship in which the source act starts after the target act ends.
    A relationship in which the source act's effective time starts after or concurrent with the end of the target act's effective time.
    The source Act starts after the start of the target Act (i.e.
    The source Act starts after start of the target Act and ends after end of the target Act.
    The source Act starts after start of the target Act, and ends with the target Act.
    A relationship in which the source act's effective time starts after or concurrent with the start of the target act's effective time.
    The source Act start after the start of the target Act, and contains the end of the target Act.
    The source Act starts before the end of the target Act (i.e.
    The source Act contains the end of the target Act.
    A relationship in which the source act's effective time starts before or concurrent with the end of the target act's effective time.
    A relationship in which the source act begins before the target act begins.
    The source Act contains the time of the target Act.
    The source Act contains the start of the target Act.
    The source Act contains the start of the target Act, and ends before the end of the target Act.
    The source Act starts before the start of the target Act, and ends before the end of the target Act.
    The source Act starts before the start of the target Act, and ends with the target Act.
    A relationship in which the source act's effective time starts before or concurrent with the start of the target act's effective time.
    Associates a specific time (and associated resources) with a scheduling request or other intent.
    A relationship in which the source act's effective time starts with the start of the target act's effective time.
    The source Act starts when the target act ends (i.e.
    The source Act starts with the target Act, and ends after the end of the target Act.
    The source Act starts with.the target Act and ends before the end of the target Act.
    A relationship in which the source act starts within the target act's effective time (including end points, as defined in the act's effective times) UsageNote: Inverse code is SBSEAS
    An act relationship indicating that the source act follows the target act.
    A relationship in which the source act's effective time starts near the end of the target act's effective time.
    A relationship in which the source act's effective time starts near the start of the target act's effective time.
    Used to indicate that an existing service is suggesting evidence for a new observation.
    A specialization of "has support" (SPRT), used to relate a secondary observation to a Region of Interest on a multidimensional observation, if the ROI specifies the true boundaries of the secondary observation as opposed to only marking the approximate area.
    A collection of sub-services as steps or subtasks performed for the source service.
    Relates an Act to its subject Act that the first Act is primarily concerned with.
    Definition: A new act that carries forward the intention of the original act, but does not completely replace it.
    null
    An act that contains summary values for a list or set of subordinate acts.
    Description: The source act is intented to provide symptomatic relief for the effects of the target act.
    Description: The source act is intended to improve a pre-existing adverse situation described by the target act.
    A pre-condition that if true should result in the source Act being executed.
    A condition thread relationship specifically links condition nodes together to form a condition thread.
    Indicates that the source act makes use of (or will make use of) the information content of the target act.
    Description:Indicates that the target Act represents the result of the source observation Act.
    The source is a direct quote from the target.
    The source is an excerpt from the target.
    Used when the target Act is a transformation of the source Act.
  • Method Summary

    Modifier and Type
    Method
    Description
    fromCode(String codeString)
     
     
     
     
     
    Returns the enum constant of this type with the specified name.
    Returns an array containing the constants of this enum type, in the order they are declared.

    Methods inherited from class java.lang.Enum

    clone, compareTo, equals, finalize, getDeclaringClass, hashCode, name, ordinal, toString, valueOf

    Methods inherited from class java.lang.Object

    getClass, notify, notifyAll, wait, wait, wait
  • Enum Constant Details

    • ART

      public static final V3ActRelationshipType ART
      Description: A directed association between a source Act and a target Act. Usage Note: This code should never be transmitted in an instance as the value of ActRelationship.typeCode (attribute)
    • _ACTCLASSTEMPORALLYPERTAINS

      ActClassTemporallyPertains
    • _ACTRELATIONSHIPACCOUNTING

      Codes that describe the relationship between an Act and a financial instrument such as a financial transaction, account or invoice element.
    • _ACTRELATIONSHIPCOSTTRACKING

      Expresses values for describing the relationship relationship between an InvoiceElement or InvoiceElementGroup and a billable act.
    • CHRG

      public static final V3ActRelationshipType CHRG
      A relationship that provides an ability to associate a financial transaction (target) as a charge to a clinical act (source). A clinical act may have a charge associated with the execution or delivery of the service. The financial transaction will define the charge (bill) for delivery or performance of the service. Charges and costs are distinct terms. A charge defines what is charged or billed to another organization or entity within an organization. The cost defines what it costs an organization to perform or deliver a service or product.
    • COST

      public static final V3ActRelationshipType COST
      A relationship that provides an ability to associate a financial transaction (target) as a cost to a clinical act (source). A clinical act may have an inherit cost associated with the execution or delivery of the service. The financial transaction will define the cost of delivery or performance of the service. Charges and costs are distinct terms. A charge defines what is charged or billed to another organization or entity within an organization. The cost defines what it costs an organization to perform or deliver a service or product.
    • _ACTRELATIONSHIPPOSTING

      Expresses values for describing the relationship between a FinancialTransaction and an Account.
    • CREDIT

      public static final V3ActRelationshipType CREDIT
      A credit relationship ties a financial transaction (target) to an account (source). A credit, once applied (posted), may have either a positive or negative effect on the account balance, depending on the type of account. An asset account credit will decrease the account balance. A non-asset account credit will decrease the account balance.
    • DEBIT

      public static final V3ActRelationshipType DEBIT
      A debit relationship ties a financial transaction (target) to an account (source). A debit, once applied (posted), may have either a positive or negative effect on the account balance, depending on the type of account. An asset account debit will increase the account balance. A non-asset account debit will decrease the account balance.
    • _ACTRELATIONSHIPCONDITIONAL

      Specifies under what circumstances (target Act) the source-Act may, must, must not or has occurred
    • CIND

      public static final V3ActRelationshipType CIND
      A contraindication is just a negation of a reason, i.e. it gives a condition under which the action is not to be done. Both, source and target can be any kind of service; target service is in criterion mood. How the strength of a contraindication is expressed (e.g., relative, absolute) is left as an open issue. The priorityNumber attribute could be used.
    • PRCN

      public static final V3ActRelationshipType PRCN
      A requirement to be true before a service is performed. The target can be any service in criterion mood. For multiple pre-conditions a conjunction attribute (AND, OR, XOR) is applicable.
    • RSON

      public static final V3ActRelationshipType RSON
      Description: The reason or rationale for a service. A reason link is weaker than a trigger, it only suggests that some service may be or might have been a reason for some action, but not that this reason requires/required the action to be taken. Also, as opposed to the trigger, there is no strong timely relation between the reason and the action. As well as providing various types of information about the rationale for a service, the RSON act relationship is routinely used between a SBADM act and an OBS act to describe the indication for use of a medication. Child concepts may be used to describe types of indication. Discussion: In prior releases, the code "SUGG" (suggests) was expressed as "an inversion of the reason link." That code has been retired in favor of the inversion indicator that is an attribute of ActRelationship.
    • BLOCK

      public static final V3ActRelationshipType BLOCK
      Definition: The source act is performed to block the effects of the target act. This act relationship should be used when describing near miss type incidents where potential harm could have occurred, but the action described in the source act blocked the potential harmful effects of the incident actually occurring.
    • DIAG

      public static final V3ActRelationshipType DIAG
      Description: The source act is intended to help establish the presence of a (an adverse) situation described by the target act. This is not limited to diseases but can apply to any adverse situation or condition of medical or technical nature.
    • IMM

      public static final V3ActRelationshipType IMM
      Description: The source act is intented to provide immunity against the effects of the target act (the target act describes an infectious disease)
    • ACTIMM

      public static final V3ActRelationshipType ACTIMM
      Description: The source act is intended to provide active immunity against the effects of the target act (the target act describes an infectious disease)
    • PASSIMM

      public static final V3ActRelationshipType PASSIMM
      Description: The source act is intended to provide passive immunity against the effects of the target act (the target act describes an infectious disease).
    • MITGT

      public static final V3ActRelationshipType MITGT
      The source act removes or lessens the occurrence or effect of the target act.
    • RCVY

      public static final V3ActRelationshipType RCVY
      Definition: The source act is performed to recover from the effects of the target act.
    • PRYLX

      public static final V3ActRelationshipType PRYLX
      Description: The source act is intended to reduce the risk of of an adverse situation to emerge as described by the target act. This is not limited to diseases but can apply to any adverse situation or condition of medical or technical nature.
    • TREAT

      public static final V3ActRelationshipType TREAT
      Description: The source act is intended to improve a pre-existing adverse situation described by the target act. This is not limited to diseases but can apply to any adverse situation or condition of medical or technical nature.
    • ADJUNCT

      public static final V3ActRelationshipType ADJUNCT
      Description: The source act is intended to offer an additional treatment for the management or cure of a pre-existing adverse situation described by the target act. This is not limited to diseases but can apply to any adverse situation or condition of medical or technical nature. It is not a requirement that the non-adjunctive treatment is explicitly specified.
    • MTREAT

      public static final V3ActRelationshipType MTREAT
      Description: The source act is intended to provide long term maintenance improvement or management of a pre-existing adverse situation described by the target act. This is not limited to diseases but can apply to any adverse situation or condition of medical or technical nature.
    • PALLTREAT

      public static final V3ActRelationshipType PALLTREAT
      Description: The source act is intended to provide palliation for the effects of the target act.
    • SYMP

      public static final V3ActRelationshipType SYMP
      Description: The source act is intented to provide symptomatic relief for the effects of the target act.
    • TRIG

      public static final V3ActRelationshipType TRIG
      A pre-condition that if true should result in the source Act being executed. The target is in typically in criterion mood. When reported after the fact (i.e. the criterion has been met) it may be in Event mood. A delay between the trigger and the triggered action can be specified. Discussion: This includes the concept of a required act for a service or financial instrument such as an insurance plan or policy. In such cases, the trigger is the occurrence of a specific condition such as coverage limits being exceeded.
    • _ACTRELATIONSHIPTEMPORALLYPERTAINS

      Abstract collector for ActRelationhsip types that relate two acts by their timing.
    • _ACTRELATIONSHIPTEMPORALLYPERTAINSAPPROXIMATES

      Abstract collector for ActRelationship types that relate two acts by their approximate timing.
    • ENE

      public static final V3ActRelationshipType ENE
      A relationship in which the source act's effective time ends near the end of the target act's effective time. Near is defined separately as a time interval. Usage Note: Inverse code is ENS
    • ECW

      public static final V3ActRelationshipType ECW
      A relationship in which the source act's effective time ends with the end of the target act's effective time. UsageNote: This code is reflexive. Therefore its inverse code is itself.
    • CONCURRENT

      public static final V3ActRelationshipType CONCURRENT
      A relationship in which the source act's effective time is the same as the target act's effective time. UsageNote: This code is reflexive. Therefore its inverse code is itself.
    • SBSECWE

      public static final V3ActRelationshipType SBSECWE
      The source Act starts before the start of the target Act, and ends with the target Act. UsageNote: Inverse code is SASECWE
    • ENS

      public static final V3ActRelationshipType ENS
      A relationship in which the source act's effective time ends near the start of the target act's effective time. Near is defined separately as a time interval. Usage Note: Inverse code is ENE
    • ECWS

      public static final V3ActRelationshipType ECWS
      The source Act ends when the target act starts (i.e. if we say "ActOne ECWS ActTwo", it means that ActOne ends when ActTwo starts, therefore ActOne is the source and ActTwo is the target). UsageNote: Inverse code is SCWE
    • SNE

      public static final V3ActRelationshipType SNE
      A relationship in which the source act's effective time starts near the end of the target act's effective time. Near is defined separately as a time interval. Usage Note: Inverse code is SNS
    • SCWE

      public static final V3ActRelationshipType SCWE
      The source Act starts when the target act ends (i.e. if we say "ActOne SCWE ActTwo", it means that ActOne starts when ActTwo ends, therefore ActOne is the source and ActTwo is the target). UsageNote: Inverse code is SBSECWS
    • SNS

      public static final V3ActRelationshipType SNS
      A relationship in which the source act's effective time starts near the start of the target act's effective time. Near is defined separately as a time interval. Usage Note: Inverse code is SNE
    • SCW

      public static final V3ActRelationshipType SCW
      A relationship in which the source act's effective time starts with the start of the target act's effective time. UsageNote: This code is reflexive. Therefore its inverse code is itself.
    • SCWSEBE

      public static final V3ActRelationshipType SCWSEBE
      The source Act starts with.the target Act and ends before the end of the target Act. UsageNote: Inverse code is SCWSEAE
    • SCWSEAE

      public static final V3ActRelationshipType SCWSEAE
      The source Act starts with the target Act, and ends after the end of the target Act.
    • EAS

      public static final V3ActRelationshipType EAS
      A relationship in which the source act ends after the target act starts. UsageNote: Inverse code is SBE
    • EAE

      public static final V3ActRelationshipType EAE
      A relationship in which the source act ends after the target act ends. UsageNote: Inverse code is EBE
    • SASEAE

      public static final V3ActRelationshipType SASEAE
      The source Act starts after start of the target Act and ends after end of the target Act. UsageNote: Inverse code is SBSEBE
    • SBEEAE

      public static final V3ActRelationshipType SBEEAE
      The source Act contains the end of the target Act. UsageNote: Inverse code is EDU
    • SASSBEEAS

      public static final V3ActRelationshipType SASSBEEAS
      The source Act start after the start of the target Act, and contains the end of the target Act. UsageNote: Inverse code is SBSEASEBE
    • SBSEAE

      public static final V3ActRelationshipType SBSEAE
      The source Act contains the time of the target Act. UsageNote: Inverse code is DURING
    • SAS

      public static final V3ActRelationshipType SAS
      The source Act starts after the start of the target Act (i.e. if we say "ActOne SAS ActTwo", it means that ActOne starts after the start of ActTwo, therefore ActOne is the source and ActTwo is the target). UsageNote: Inverse code is SBS
    • SAE

      public static final V3ActRelationshipType SAE
      A relationship in which the source act starts after the target act ends. UsageNote: Inverse code is EBS
    • DURING

      public static final V3ActRelationshipType DURING
      A relationship in which the source act's effective time is wholly within the target act's effective time (including end points, as defined in the act's effective times) UsageNote: Inverse code is SBSEAE
    • SASECWE

      public static final V3ActRelationshipType SASECWE
      The source Act starts after start of the target Act, and ends with the target Act. UsageNote: Inverse code is SBSECWE
    • EASORECWS

      public static final V3ActRelationshipType EASORECWS
      A relationship in which the source act's effective time ends after or concurrent with the start of the target act's effective time. Usage Note: Inverse code is EBSORECWS
    • EAEORECW

      public static final V3ActRelationshipType EAEORECW
      A relationship in which the source act's effective time ends after or concurrent with the end of the target act's effective time. Usage Note: Inverse code is EBEORECW
    • INDEPENDENT

      public static final V3ActRelationshipType INDEPENDENT
      The source Act is independent of the time of the target Act. UsageNote: This code is reflexive. Therefore its inverse code is itself.
    • SAEORSCWE

      public static final V3ActRelationshipType SAEORSCWE
      A relationship in which the source act's effective time starts after or concurrent with the end of the target act's effective time. Usage Note: Inverse code is SBEORSCWE
    • SASORSCW

      public static final V3ActRelationshipType SASORSCW
      A relationship in which the source act's effective time starts after or concurrent with the start of the target act's effective time. Usage Note: Inverse code is SBSORSCW
    • SBEORSCWE

      public static final V3ActRelationshipType SBEORSCWE
      A relationship in which the source act's effective time starts before or concurrent with the end of the target act's effective time. Usage Note: Inverse code is SAEORSCWE
    • OVERLAP

      public static final V3ActRelationshipType OVERLAP
      A relationship in which the source act's effective time overlaps the target act's effective time in any way. UsageNote: This code is reflexive. Therefore its inverse code is itself.
    • EDU

      public static final V3ActRelationshipType EDU
      A relationship in which the source act ends within the target act's effective time (including end points, as defined in the act's effective times) UsageNote: Inverse code is SBEEAE
    • SBSEASEBE

      public static final V3ActRelationshipType SBSEASEBE
      The source Act contains the start of the target Act, and ends before the end of the target Act. UsageNote: Inverse code is SASSBEEAS
    • SBSEAS

      public static final V3ActRelationshipType SBSEAS
      The source Act contains the start of the target Act. UsageNote: Inverse code is SDU
    • SDU

      public static final V3ActRelationshipType SDU
      A relationship in which the source act starts within the target act's effective time (including end points, as defined in the act's effective times) UsageNote: Inverse code is SBSEAS
    • SBE

      public static final V3ActRelationshipType SBE
      The source Act starts before the end of the target Act (i.e. if we say "ActOne SBE ActTwo", it means that ActOne starts before the end of ActTwo, therefore ActOne is the source and ActTwo is the target). UsageNote: Inverse code is EAS
    • EBE

      public static final V3ActRelationshipType EBE
      The source Act ends before the end of the target Act (i.e. if we say "ActOne EBE ActTwo", it means that ActOne ends before the end of ActTwo, therefore ActOne is the source and ActTwo is the target). UsageNote: Inverse code is EAE
    • SBSEBE

      public static final V3ActRelationshipType SBSEBE
      The source Act starts before the start of the target Act, and ends before the end of the target Act. UsageNote: Inverse code is SASEAE
    • EBSORECWS

      public static final V3ActRelationshipType EBSORECWS
      A relationship in which the source act's effective time ends before or concurrent with the start of the target act's effective time. Usage Note: Inverse code is EASORECWS
    • EBS

      public static final V3ActRelationshipType EBS
      A relationship in which the source act ends before the target act starts. UsageNote: Inverse code is SAE
    • EBEORECW

      public static final V3ActRelationshipType EBEORECW
      A relationship in which the source act's effective time ends before or concurrent with the end of the target act's effective time. Usage Note: Inverse code is EAEORECW
    • SBSORSCW

      public static final V3ActRelationshipType SBSORSCW
      A relationship in which the source act's effective time starts before or concurrent with the start of the target act's effective time. Usage Note: Inverse code is SASORSCW
    • SBS

      public static final V3ActRelationshipType SBS
      A relationship in which the source act begins before the target act begins. UsageNote: Inverse code is SAS
    • AUTH

      public static final V3ActRelationshipType AUTH
      A relationship in which the target act authorizes or certifies the source act.
    • CAUS

      public static final V3ActRelationshipType CAUS
      Description: An assertion that an act was the cause of another act.This is stronger and more specific than the support link. The source (cause) is typically an observation, but may be any act, while the target may be any act. Examples: a growth of Staphylococcus aureus may be considered the cause of an abscess contamination of the infusion bag was deemed to be the cause of the infection that the patient experienced lack of staff on the shift was deemed to be a supporting factor (proximal factor) causing the patient safety incident where the patient fell out of bed because the bed-sides had not been put up which caused the night patient to fall out of bed
    • COMP

      public static final V3ActRelationshipType COMP
      The target act is a component of the source act, with no semantics regarding composition or aggregation implied.
    • CTRLV

      public static final V3ActRelationshipType CTRLV
      A relationship from an Act to a Control Variable. For example, if a Device makes an Observation, this relates the Observation to its Control Variables documenting the device's settings that influenced the observation.
    • MBR

      public static final V3ActRelationshipType MBR
      The target Acts are aggregated by the source Act. Target Acts may have independent existence, participate in multiple ActRelationships, and do not contribute to the meaning of the source. UsageNotes: This explicitly represents the conventional notion of aggregation. The target Act is part of a collection of Acts (no implication is made of cardinality, a source of Acts may contain zero, one, or more member target Acts). It is expected that this will be primarily used with _ActClassRecordOrganizer, BATTERY, and LIST
    • STEP

      public static final V3ActRelationshipType STEP
      A collection of sub-services as steps or subtasks performed for the source service. Services may be performed sequentially or concurrently. UsageNotes: Sequence of steps may be indicated by use of _ActRelationshipTemporallyPertains, as well as via ActRelationship.sequenceNumber, ActRelationship.pauseQuantity, Target.priorityCode. OpenIssue: Need Additional guidelines on when each approach should be used.
    • ARR

      public static final V3ActRelationshipType ARR
      The relationship that links to a Transportation Act (target) from another Act (source) indicating that the subject of the source Act entered into the source Act by means of the target Transportation act.
    • DEP

      public static final V3ActRelationshipType DEP
      The relationship that links to a Transportation Act (target) from another Act (source) indicating that the subject of the source Act departed from the source Act by means of the target Transportation act.
    • PART

      public static final V3ActRelationshipType PART
      The source Act is a composite of the target Acts. The target Acts do not have an existence independent of the source Act. UsageNote: In UML 1.1, this is a "composition" defined as: "A form of aggregation with strong ownership and coincident lifetime as part of the whole. Parts with non-fixed multiplicity may be created after the composite itself, but once created they live and die with it (i.e., they share lifetimes). Such parts can also be explicitly removed before the death of the composite. Composition may be recursive."
    • COVBY

      public static final V3ActRelationshipType COVBY
      A relationship in which the source act is covered by or is under the authority of a target act. A financial instrument such as an Invoice Element is covered by one or more specific instances of an Insurance Policy.
    • DRIV

      public static final V3ActRelationshipType DRIV
      Associates a derived Act with its input parameters. E.G., an anion-gap observation can be associated as being derived from given sodium-, (potassium-,), chloride-, and bicarbonate-observations. The narrative content (Act.text) of a source act is wholly machine-derived from the collection of target acts.
    • ELNK

      public static final V3ActRelationshipType ELNK
      Expresses an association that links two instances of the same act over time, indicating that the instance are part of the same episode, e.g. linking two condition nodes for episode of illness; linking two encounters for episode of encounter.
    • EVID

      public static final V3ActRelationshipType EVID
      Indicates that the target Act provides evidence in support of the action represented by the source Act. The target is not a 'reason' for the source act, but rather gives supporting information on why the source act is an appropriate course of action. Possible targets might be clinical trial results, journal articles, similar successful therapies, etc. Rationale: Provides a mechanism for conveying clinical justification for non-approved or otherwise non-traditional therapies.
    • EXACBY

      public static final V3ActRelationshipType EXACBY
      Description:The source act is aggravated by the target act. (Example "chest pain" EXACBY "exercise")
    • EXPL

      public static final V3ActRelationshipType EXPL
      This is the inversion of support. Used to indicate that a given observation is explained by another observation or condition.
    • INTF

      public static final V3ActRelationshipType INTF
      the target act documents a set of circumstances (events, risks) which prevent successful completion, or degradation of quality of, the source Act. UsageNote: This provides the semantics to document barriers to care
    • ITEMSLOC

      public static final V3ActRelationshipType ITEMSLOC
      Items located
    • LIMIT

      public static final V3ActRelationshipType LIMIT
      A relationship that limits or restricts the source act by the elements of the target act. For example, an authorization may be limited by a financial amount (up to $500). Target Act must be in EVN.CRIT mood.
    • META

      public static final V3ActRelationshipType META
      Definition: Indicates that the attributes and associations of the target act provide metadata (for example, identifiers, authorship, etc.) for the source act. Constraint: Source act must have either a mood code that is not "EVN" (event) or its "isCriterion" attribute must set to "true". Target act must be an Act with a mood code of EVN and with isCriterionInd attribute set to "true".
    • MFST

      public static final V3ActRelationshipType MFST
      An assertion that a new observation may be the manifestation of another existing observation or action. This assumption is attributed to the same actor who asserts the manifestation. This is stronger and more specific than an inverted support link. For example, an agitated appearance can be asserted to be the manifestation (effect) of a known hyperthyroxia. This expresses that one might not have realized a symptom if it would not be a common manifestation of a known condition. The target (cause) may be any service, while the source (manifestation) must be an observation.
    • NAME

      public static final V3ActRelationshipType NAME
      Used to assign a "name" to a condition thread. Source is a condition node, target can be any service.
    • OUTC

      public static final V3ActRelationshipType OUTC
      An observation that should follow or does actually follow as a result or consequence of a condition or action (sometimes called "post-conditional".) Target must be an observation as a goal, risk or any criterion. For complex outcomes a conjunction attribute (AND, OR, XOR) can be used. An outcome link is often inverted to describe an outcome assessment.
    • _ACTRELATIONSIPOBJECTIVE

      The target act is a desired outcome of the source act. Source is any act (typically an intervention). Target must be an observation in criterion mood.
    • OBJC

      public static final V3ActRelationshipType OBJC
      A desired state that a service action aims to maintain. E.g., keep systolic blood pressure between 90 and 110 mm Hg. Source is an intervention service. Target must be an observation in criterion mood.
    • OBJF

      public static final V3ActRelationshipType OBJF
      A desired outcome that a service action aims to meet finally. Source is any service (typically an intervention). Target must be an observation in criterion mood.
    • GOAL

      public static final V3ActRelationshipType GOAL
      A goal that one defines given a patient's health condition. Subsequently planned actions aim to meet that goal. Source is an observation or condition node, target must be an observation in goal mood.
    • RISK

      public static final V3ActRelationshipType RISK
      A noteworthy undesired outcome of a patient's condition that is either likely enough to become an issue or is less likely but dangerous enough to be addressed.
    • PERT

      public static final V3ActRelationshipType PERT
      This is a very unspecific relationship from one item of clinical information to another. It does not judge about the role the pertinent information plays.
    • PREV

      public static final V3ActRelationshipType PREV
      A relationship in which the target act is a predecessor instance to the source act. Generally each of these instances is similar, but no identical. In healthcare coverage it is used to link a claim item to a previous claim item that might have claimed for the same set of services.
    • REFR

      public static final V3ActRelationshipType REFR
      A relationship in which the target act is referred to by the source act. This permits a simple reference relationship that distinguishes between the referent and the referee.
    • USE

      public static final V3ActRelationshipType USE
      Indicates that the source act makes use of (or will make use of) the information content of the target act. UsageNotes: A usage relationship only makes sense if the target act is authored and occurs independently of the source act. Otherwise a simpler relationship such as COMP would be appropriate. Rationale: There is a need when defining a clinical trial protocol to indicate that the protocol makes use of other protocol or treatment specifications. This is stronger than the assertion of "references". References may exist without usage, and in a clinical trial protocol is common to assert both: what other specifications does this trial use and what other specifications does it merely reference.
    • REFV

      public static final V3ActRelationshipType REFV
      Reference ranges are essentially descriptors of a class of result values assumed to be "normal", "abnormal", or "critical." Those can vary by sex, age, or any other criterion. Source and target are observations, the target is in criterion mood. This link type can act as a trigger in case of alarms being triggered by critical results.
    • RELVBY

      public static final V3ActRelationshipType RELVBY
      Description:The source act is wholly or partially alleviated by the target act. (Example "chest pain" RELVBY "sublingual nitroglycerin administration")
    • SEQL

      public static final V3ActRelationshipType SEQL
      An act relationship indicating that the source act follows the target act. The source act should in principle represent the same kind of act as the target. Source and target need not have the same mood code (mood will often differ). The target of a sequel is called antecedent. Examples for sequel relationships are: revision, transformation, derivation from a prototype (as a specialization is a derivation of a generalization), followup, realization, instantiation.
    • APND

      public static final V3ActRelationshipType APND
      An addendum (source) to an existing service object (target), containing supplemental information. The addendum is itself an original service object linked to the supplemented service object. The supplemented service object remains in place and its content and status are unaltered.
    • BSLN

      public static final V3ActRelationshipType BSLN
      Indicates that the target observation(s) provide an initial reference for the source observation or observation group. UsageConstraints: Both source and target must be Observations or specializations thereof.
    • COMPLY

      public static final V3ActRelationshipType COMPLY
      Description:The source act complies with, adheres to, conforms to, or is permissible under (in whole or in part) the policy, contract, agreement, law, conformance criteria, certification guidelines or requirement conveyed by the target act. Examples for compliance relationships are: audits of adherence with a security policy, certificate of conformance to system certification requirements, or consent directive in compliance with or permissible under a privacy policy.
    • DOC

      public static final V3ActRelationshipType DOC
      The source act documents the target act.
    • FLFS

      public static final V3ActRelationshipType FLFS
      The source act fulfills (in whole or in part) the target act. Source act must be in a mood equal or more actual than the target act.
    • OCCR

      public static final V3ActRelationshipType OCCR
      The source act is a single occurrence of a repeatable target act. The source and target act can be in any mood on the "completion track" but the source act must be as far as or further along the track than the target act (i.e., the occurrence of an intent can be an event but not vice versa).
    • OREF

      public static final V3ActRelationshipType OREF
      Relates either an appointment request or an appointment to the order for the service being scheduled.
    • SCH

      public static final V3ActRelationshipType SCH
      Associates a specific time (and associated resources) with a scheduling request or other intent.
    • GEN

      public static final V3ActRelationshipType GEN
      The generalization relationship can be used to express categorical knowledge about services (e.g., amilorid, triamterene, and spironolactone have the common generalization potassium sparing diuretic).
    • GEVL

      public static final V3ActRelationshipType GEVL
      A goal-evaluation links an observation (intent or actual) to a goal to indicate that the observation evaluates the goal. Given the goal and the observation, a "goal distance" (e.g., goal to observation) can be "calculated" and need not be sent explicitly.
    • INST

      public static final V3ActRelationshipType INST
      Used to capture the link between a potential service ("master" or plan) and an actual service, where the actual service instantiates the potential service. The instantiation may override the master's defaults.
    • MOD

      public static final V3ActRelationshipType MOD
      Definition: Used to link a newer version or 'snapshot' of a business object (source) to an older version or 'snapshot' of the same business object (target). Usage:The identifier of the Act should be the same for both source and target. If the identifiers are distinct, RPLC should be used instead. Name from source to target = "modifiesPrior" Name from target to source = "modifiesByNew"
    • MTCH

      public static final V3ActRelationshipType MTCH
      A trigger-match links an actual service (e.g., an observation or procedure that took place) with a service in criterion mood. For example if the trigger is "observation of pain" and pain is actually observed, and if that pain-observation caused the trigger to fire, that pain-observation can be linked with the trigger.
    • OPTN

      public static final V3ActRelationshipType OPTN
      A relationship between a source Act that provides more detailed properties to the target Act. The source act thus is a specialization of the target act, but instead of mentioning all the inherited properties it only mentions new property bindings or refinements. The typical use case is to specify certain alternative variants of one kind of Act. The priorityNumber attribute is used to weigh refinements as preferred over other alternative refinements. Example: several routing options for a drug are specified as one SubstanceAdministration for the general treatment with attached refinements for the various routing options.
    • RCHAL

      public static final V3ActRelationshipType RCHAL
      Description:A relationship in which the target act is carried out to determine whether an effect attributed to the source act can be recreated.
    • REV

      public static final V3ActRelationshipType REV
      A relationship between a source Act that seeks to reverse or undo the action of the prior target Act. Example: A posted financial transaction (e.g., a debit transaction) was applied in error and must be reversed (e.g., by a credit transaction) the credit transaction is identified as an undo (or reversal) of the prior target transaction. Constraints: the "completion track" mood of the target Act must be equally or more "actual" than the source act. I.e., when the target act is EVN the source act can be EVN, or any INT. If the target act is INT, the source act can be INT.
    • RPLC

      public static final V3ActRelationshipType RPLC
      A replacement source act replaces an existing target act. The state of the target act being replaced becomes obselete, but the act is typically still retained in the system for historical reference. The source and target must be of the same type.
    • SUCC

      public static final V3ActRelationshipType SUCC
      Definition: A new act that carries forward the intention of the original act, but does not completely replace it. The status of the predecessor act must be 'completed'. The original act is the target act and the successor is the source act.
    • UPDT

      public static final V3ActRelationshipType UPDT
      A condition thread relationship specifically links condition nodes together to form a condition thread. The source is the new condition node and the target links to the most recent node of the existing condition thread.
    • XCRPT

      public static final V3ActRelationshipType XCRPT
      The source is an excerpt from the target.
    • VRXCRPT

      public static final V3ActRelationshipType VRXCRPT
      The source is a direct quote from the target.
    • XFRM

      public static final V3ActRelationshipType XFRM
      Used when the target Act is a transformation of the source Act. (For instance, used to show that a CDA document is a transformation of a DICOM SR document.)
    • SPRT

      public static final V3ActRelationshipType SPRT
      Used to indicate that an existing service is suggesting evidence for a new observation. The assumption of support is attributed to the same actor who asserts the observation. Source must be an observation, target may be any service (e.g., to indicate a status post).
    • SPRTBND

      public static final V3ActRelationshipType SPRTBND
      A specialization of "has support" (SPRT), used to relate a secondary observation to a Region of Interest on a multidimensional observation, if the ROI specifies the true boundaries of the secondary observation as opposed to only marking the approximate area. For example, if the start and end of an ST elevation episode is visible in an EKG, this relation would indicate the ROI bounds the "ST elevation" observation -- the ROI defines the true beginning and ending of the episode. Conversely, if a ROI simply contains ST elevation, but it does not define the bounds (start and end) of the episode, the more general "has support" relation is used. Likewise, if a ROI on an image defines the true bounds of a "1st degree burn", the relation "has bounded support" is used; but if the ROI only points to the approximate area of the burn, the general "has support" relation is used.
    • SUBJ

      public static final V3ActRelationshipType SUBJ
      Relates an Act to its subject Act that the first Act is primarily concerned with. Examples The first Act may be a ControlAct manipulating the subject Act The first act is a region of interest (ROI) that defines a region within the subject Act. The first act is a reporting or notification Act, that echos the subject Act for a specific new purpose. Constraints An Act may have multiple subject acts. Rationale The ActRelationshipType "has subject" is similar to the ParticipationType "subject", Acts that primarily operate on physical subjects use the Participation, those Acts that primarily operate on other Acts (other information) use the ActRelationship.
    • QUALF

      public static final V3ActRelationshipType QUALF
      The target observation qualifies (refines) the semantics of the source observation. UsageNote: This is not intended to replace concept refinement and qualification via vocabulary. It is used when there are multiple components which together provide the complete understanding of the source Act.
    • SUMM

      public static final V3ActRelationshipType SUMM
      An act that contains summary values for a list or set of subordinate acts. For example, a summary of transactions for a particular accounting period.
    • VALUE

      public static final V3ActRelationshipType VALUE
      Description:Indicates that the target Act represents the result of the source observation Act. FormalConstraint: Source Act must be an Observation or specialization there-of. Source Act must not have the value attribute specified UsageNote: This relationship allows the result of an observation to be fully expressed as RIM acts as opposed to being embedded in the value attribute. For example, sending a Document act as the result of an imaging observation, sending a list of Procedures and/or other acts as the result of a medical history observation. The valueNegationInd attribute on the source Act has the same semantics of "negated finding" when it applies to the target of a VALUE ActRelationship as it does to the value attribute. On the other hand, if the ActRelationship.negationInd is true for a VALUE ActRelationship, that means the specified observation does not have the indicated value but does not imply a negated finding. Because the semantics are extremely close, it is recommended that Observation.valueNegationInd be used, not ActRelationship.negationInd. OpenIssue: The implications of negationInd on ActRelationship and the valueNegationind on Observation.
    • CURE

      public static final V3ActRelationshipType CURE
      curative indication
    • CURE_ADJ

      public static final V3ActRelationshipType CURE_ADJ
      adjunct curative indication
    • MTGT_ADJ

      public static final V3ActRelationshipType MTGT_ADJ
      adjunct mitigation
    • RACT

      public static final V3ActRelationshipType RACT
      null
    • SUGG

      public static final V3ActRelationshipType SUGG
      null
    • NULL

      public static final V3ActRelationshipType NULL
      added to help the parsers
  • Method Details

    • values

      public static V3ActRelationshipType[] values()
      Returns an array containing the constants of this enum type, in the order they are declared.
      Returns:
      an array containing the constants of this enum type, in the order they are declared
    • valueOf

      public static V3ActRelationshipType valueOf(String name)
      Returns the enum constant of this type with the specified name. The string must match exactly an identifier used to declare an enum constant in this type. (Extraneous whitespace characters are not permitted.)
      Parameters:
      name - the name of the enum constant to be returned.
      Returns:
      the enum constant with the specified name
      Throws:
      IllegalArgumentException - if this enum type has no constant with the specified name
      NullPointerException - if the argument is null
    • fromCode

      public static V3ActRelationshipType fromCode(String codeString) throws org.hl7.fhir.exceptions.FHIRException
      Throws:
      org.hl7.fhir.exceptions.FHIRException
    • toCode

      public String toCode()
    • getSystem

      public String getSystem()
    • getDefinition

    • getDisplay

      public String getDisplay()